|Home » Categories » Multiple Categories|
How to Safely Remove a Hair Weave
Article Number: 36 | Rating: 5/5 from 1 votes | Last Updated: Fri, Jul 1, 2011 at 2:34 PM
If you have never done this before, you may find it pretty difficult to as there is a risk of cutting your own hair in the process. Removing a hair weave is something that requires a fair amount of patience and if you are not careful, you may even damage your scalp.
Sew-in Hair Weaves
If you want to safely, the first thing you need to ensure is whether your tracks are ready to come out. If you have maintained your weave properly, it will stay for 4-6 weeks. If the braids are lifted, the process should be easy, particularly if you installed it yourself in the first place because you know the route in which the weave was sewed in.
Make a ponytail of the weave on the top of your head; if you are using a short style, put clips around the head. Now, locate the last track in the back and release it from the ponytail. You need to be careful here. Placing a mirror behind you will help because this is your back and you may not be able to tell the thread from your hair.
Cut a piece of thread. Once you have cut the thread from one end, use your fingers to remove the remaining thread. Keep lifting the thread with your fingers till you get stuck at a point. Here, you will have to make another cut. Repeat till you have .
you have used a glue-in hair extension, you have to use another method to .
How to Glue
The first step is to separate all the weave extensions from your hair. For this purpose, you need to apply a little bit of oil with your hands or spray a good amount of oil sheen. Oil helps break the glue bond and makes it easy to slide the weave track. As you massage the oil in, you will find the weave extensions slipping off.
Take a hair-bond remover and apply it to each weft. Massage the remover gently and let it remain for 10 minutes. This will dissolve the glue and allow you to . Gently pull each hair extension by sliding your finger along the glue bond. If you come across a stubborn bond, apply more bond remover on that area.
Once the extensions have been removed, there will still be some glue on your hair and scalp. Use a wide-toothed comb to locate fragments of glue that were not broken down by the bond remover.
For removing excess hair glue, you need a detangling shampoo. Wash your hair using cold water, making sure that you massage the areas having large fragments of glue. Avoid warm water because this may cause the adhesive to melt in your hair and make matters difficult. Rinse your hair and apply a generous amount of good quality hair conditioner. Rinse the conditioner off and allow your hair to dry.
There are no attachments for this article.
There are no comments for this article. Be the first to post a comment.
Do I have to do anything special in the evening before I go to bed?
Viewed 1459 times since Fri, Jun 10, 2011
The Best Products to Use on Your Hair
Viewed 3673 times since Fri, Jul 1, 2011
Hair Extension Length Chart
Viewed 3784 times since Fri, Jun 10, 2011
How to Install a Swiss Lace Closure
Viewed 8457 times since Fri, Jul 1, 2011
How to Install Clip on Hair Extensions
Viewed 16709 times since Fri, Jul 1, 2011
Lace Front and Full Lace Wig Application Guide
Viewed 4390 times since Thu, Jun 30, 2011
How to Install Seamless Skin Wefted Hair Extensions
Viewed 2692 times since Fri, Jul 1, 2011
What You Wanted to Know About Cuticle Indian Hair
Viewed 2381 times since Fri, Jul 1, 2011
How to Maintain Fusion Hair Extensions
Viewed 4631 times since Fri, Jul 1, 2011
How Much Hair Do I Need for a Full Weave?
Viewed 43660 times since Thu, Dec 29, 2011